EINHELL TC-DW 225 User Manual

TC-DW 225
Art.-Nr.: 42.599.30 I.-Nr.: 11014
7
D Originalbetriebsanleitung
Trockenbauschleifer
GB Original operating instructions
Drywall power sander
F Mode d’emploi d’origine
Ponceuse à sec
I Istruzioni per l’uso originali
Levigatrice per cartongesso
HR/ Originalne upute za uporabu
BIH Brusilica za suho brušenje
RS Originalna uputstva za upotrebu
Brusilica za suvo brušenje
NL Originele handleiding
Droogbouwschuurmachine
E Manual de instrucciones original
Lijadora para paredes en seco
P Manual de instruções original
Lixadeira para pré-fabricados e
acabamentos
SLO Originalna navodila za uporabo
Brusilnik za suhomontažna dela
PL Instrukcją oryginalną
Szlifi erka do gładzi
GR Πρωτότυπες Οδηγίες χρήσης
Λειαντήρας στεγνών κατασκευών
Anl_TC_DW_225_SPK7.indb 1Anl_TC_DW_225_SPK7.indb 1 10.12.14 16:0610.12.14 16:06

EINHELL TC-DW 225 Specifications

General

Power	600 W
Cable length	4 m
Power source	AC
AC input voltage	230-240 V
Idle speed (max)	1500 RPM
Idle speed (min)	600 RPM
Type of sander	-

Weight and Dimensions

Depth	680 mm
Width	215 mm
Height	335 mm
Weight	3200 g

Summary

Layout and Items Supplied

Layout (Fig. 1/7)

Identifies the components of the drywall power sander.

Items Supplied

Lists the items included in the product packaging.

Safety Regulations

Proper Use

Technical Data

Sound and Vibration

Details sound pressure and vibration emission values.

Handle

Specifies vibration values for the handle.

Before Starting the Equipment

Assembling the Drywall Sander (Fig. 2)

Step-by-step guide to assembling the sander using the locking hook.

Fitting the Telescopic Extension (Fig. 3)

Instructions on extending and securing the telescopic tube.

Connection for Dust Extractor (Fig. 4)

Details how to connect the dust extractor hose for dust removal.

Fastening the Grinding/Sanding Paper (Fig. 5)

Operation

On/Off Switch (Fig. 6/7)

How to switch the device on, off, and operate in continuous mode.

Speed Controller (Fig. 7/Item 2)

Instructions on adjusting the operating speed of the sander.

Working with the Drywall Power Sander

Guidance on sanding techniques, grit selection, and safe operation.

Swiveling Sanding Disk (Fig. 1)

Describes the flexibility of the sanding disk for various positions.

Replacing the Power Cable

Cleaning, Maintenance and Ordering of Spare Parts

Cleaning

Steps for cleaning the equipment and its components.

Carbon Brushes

Information on checking and replacing carbon brushes.

Maintenance

Ordering Spare Parts and Accessories

Disposal and Recycling

Storage

Service Information

Warranty Certificate