EINHELL TC-DW 225 User Manual

GB
- 17 -
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
Tip! For good results we
recommend high-quality ac-
cessories from !
www.kwb.eu
welcome@kwb.eu
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
Anl_TC_DW_225_SPK7.indb 17Anl_TC_DW_225_SPK7.indb 17 02.12.14 13:5302.12.14 13:53

EINHELL TC-DW 225 Specifications

General

Power	600 W
Cable length	4 m
Power source	AC
AC input voltage	230-240 V
Idle speed (max)	1500 RPM
Idle speed (min)	600 RPM
Type of sander	-

Weight and Dimensions

Depth	680 mm
Width	215 mm
Height	335 mm
Weight	3200 g