To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-PE 150 and is the answer not in the manual?
General| Package weight | 1400 g |
|---|---|
| Power | - W |
| Power source | Compressed air |
| Maximum airflow | 100 l/min |
| Idle speed (max) | 10500 RPM |
| Maximum operating pressure | 6.3 bar |
| Oscillating orbit diameter | 5 mm |
| Number of sandpapers | 6 |
| Product color | Black, Red |
| Type of sander | Disc sander |
Weight and Dimensions| Depth | 155 mm |
|---|---|
| Width | 140 mm |
| Height | 258 mm |
| Weight | 800 g |
| Sanding disc diameter | 150 mm |
Identifies the components of the eccentric sander and its accessories.
Lists all parts included in the product package.
Instructions on how to lubricate the tool before and during operation.
Guide on connecting the dust extractor adapter to a dust extraction system.
Steps for connecting the tool to a compressed air source.
How to operate the power switch to turn the tool on and off.
Instructions on adjusting the tool's rotational speed using the control lever.
Guidance on proper techniques for sanding and grinding with the equipment.
Procedures for cleaning the equipment after use and general maintenance.
Information on regular lubrication and other maintenance tasks for longevity.
Details required when ordering new parts for the equipment.
