To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-RS 38 E and is the answer not in the manual?
General| Product color | Black, Red |
|---|---|
| Type of sander | Orbital sander |
| Dust extraction port | Yes |
| Sanding media fixing | Velcro |
| Idle speed (max) | 13000, 26000 RPM |
| Idle speed (min) | 6000, 12000 RPM |
| Sound power level | 95 dB |
| Sound pressure level | 84 dB |
| Sound level uncertainty | 3 dB |
| Oscillating orbit diameter | 2 mm |
| Power | 380 W |
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 10.223 m/s² |
| Dust container type | Dust bag |
| Package weight | 2190 g |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 305 mm |
|---|---|
| Width | 123 mm |
| Height | 188 mm |
| Weight | 2000 g |
| Sanding disc diameter | 125 mm |
Essential PPE includes ear-muffs, breathing masks, and safety goggles to prevent injury.
Details general safety regulations and warnings for safe operation.
Identifies the components of the tool and lists supplied accessories.
Defines the proper use of the sander and provides its technical specifications.
Information on sound/vibration levels, potential residual risks, and hearing protection.
Instructions for fitting the dust bag and abrasive paper before starting.
Guidance on turning the equipment on/off and adjusting the speed.
Instructions for proper sanding, including safety measures and material handling.
Procedure and safety warnings for replacing the power cable.
Instructions for cleaning the equipment and general maintenance procedures.
Information on checking carbon brushes and ordering replacement parts.
Guidelines for environmentally friendly disposal and recycling of the equipment.
Recommendations for storing the equipment safely.
Declaration of conformity with EU directives and standards.
Declaration of conformity with UK standards and legislation.
