EINHELL TE-MX 1600-2 CE User Manual

TE-MX 1600-2 CE
Art.-Nr.: 42.585.55 I.-Nr.: 11014
7
D Originalbetriebsanleitung
Farb-Mörtelrührer
GB Original operating instructions
Paint and mortar mixer
F Instructions d’origine
Mélangeur de mortier et peinture
I Istruzioni per l’uso originali
Miscelatore
HR/ Originalne upute za uporabu
BIH Miješalica za boju i mort
RS Originalna uputstva za upotrebu
Mešalica za boju i malter
CZ Originální návod k obsluze
Míchadlo na barvu a maltu
NL Originele handleiding
Verf- en mortelmenger
E Manual de instrucciones original
Batidor mezclador
P Manual de instruções original
Misturador de argamassa e de
tintas
SLO Originalna navodila za uporabo
Mešalnik za barvo, malto
H Eredeti használati utasítás
Mešalnik za barvo, malto
PL Instrukcją oryginalną
Mieszadło do farb i zapraw
GR Πρωτότυπες Οδηγίες χρήσης
Αναδευτήρας χρωμάτων
TR Orijinal Kullanma Talimatı
Karıştırma Matkabı
S Original-bruksanvisning
Färg- och bruksomrörare
FIN Alkuperäiskäyttöohje
Maali- ja laastisekoitin
Anl_TE_MX_1600_2_CE_SPK7.indb 1Anl_TE_MX_1600_2_CE_SPK7.indb 1 16.10.15 12:3416.10.15 12:34

EINHELL TE-MX 1600-2 CE Specifications

General

Best uses	Mortar, Paint, Powder
Chuck type	-
Product color	Black, Red
Spindle thread	M14
Variable speed	Yes
Number of speeds	2
Handle(s) features	Ergonomic
Input power	1600 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Idle speed	750 RPM
Torque (max)	- N⋅m

Weight and Dimensions

Depth	325 mm
Width	330 mm
Height	210 mm
Weight	3480 g

Summary

Safety Regulations

Layout and Items Supplied

2.1 Layout (Fig. 1)

Overview of product components and their identifiers as shown in Figure 1.

2.2 Items Supplied

Instructions for verifying all delivered parts and contacting service if items are missing.

Proper Use

Technical Data

Sound and Vibration

Before Starting the Equipment

Mixer Assembly (Fig. 2-3)

Step-by-step guide for attaching the mixing tool to the equipment using provided wrenches.

Operation

6.1 ON/OFF Switch (Fig. 4/Item 1)

Instructions for operating the power switch, including continuous operation mode.

6.2 Speed Control (Fig. 5/Item 2)

6.3 Defining the Speed Range (Fig. 6/Item 5)

Replacing the Power Cable

Cleaning, Maintenance and Ordering of Spare Parts

8.1 Cleaning

Guidelines for cleaning the equipment, emphasizing safety and proper methods.

8.2 Carbon Brushes

Information regarding carbon brushes and the need for a qualified electrician.

8.3 Maintenance

Statement that there are no internal parts requiring user maintenance.

8.4 Ordering Spare Parts and Accessories

Details required for ordering spare parts and where to find information.

9. Disposal and Recycling

10. Storage

Service Information

Warranty Certificate