EINHELL TC-MX 1400-2 E User Manual

TC-MX 1400-2 E
Art.-Nr.: 42.585.50 I.-Nr.: 11014
7
D Originalbetriebsanleitung
Farb-Mörtelrührer
GB Original operating instructions
Paint and mortar mixer
F Instructions d’origine
Mélangeur de mortier et peinture
I Istruzioni per l’uso originali
Miscelatore
HR/ Originalne upute za uporabu
BIH Miješalica za boju i mort
RS Originalna uputstva za upotrebu
Mešalica za boju i malter
CZ Originální návod k obsluze
Míchadlo na barvu a maltu
NL Originele handleiding
Verf- en mortelmenger
E Manual de instrucciones original
Batidor mezclador
P Manual de instruções original
Misturador de argamassa e de
tintas
SLO Originalna navodila za uporabo
Mešalnik za barvo, malto
H Eredeti használati utasítás
Mešalnik za barvo, malto
PL Instrukcją oryginalną
Mieszadło do farb i zapraw
GR Πρωτότυπες Οδηγίες χρήσης
Αναδευτήρας χρωμάτων
TR Orijinal Kullanma Talimatı
Karıştırma Matkabı
S Original-bruksanvisning
Färg- och bruksomrörare
FIN Alkuperäiskäyttöohje
Maali- ja laastisekoitin
Anl_TC_MX_1400_2_E_SPK7.indb 1Anl_TC_MX_1400_2_E_SPK7.indb 1 30.07.15 14:5730.07.15 14:57

EINHELL TC-MX 1400-2 E Specifications

General

Input power	1400 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Idle speed	780 RPM
Torque (max)	- N⋅m
Maximum stirrer diameter	133 mm
Package depth	345 mm
Package width	675 mm
Package height	230 mm
Package weight	6070 kg
Best uses	Mortar, Paint
Chuck type	-
Soft start	Yes
Product color	Red
Spindle thread	M14
Number of speeds	2

Weight and Dimensions

Width	325 mm
Height	210 mm
Weight	3460 g

Summary

Safety Regulations

General Safety Precautions

Key safety warnings and instructions for safe manual storage.

Product Overview

Components and Package Contents

Details the equipment's parts and what's included in the package.

Proper Use Guidelines

Technical Specifications

Sound and Vibration Levels

Presents technical specifications for sound emission and hand-arm vibration.

Pre-Operation Procedures

Setup and Safety Checks

Essential pre-operation safety checks and mixer assembly instructions.

Operating the Mixer

Controls and Speed Adjustment

Explains operation of power switch, speed control, and gear selection.

Power Cable Replacement

Power Cable Replacement Warning

Critical safety warning regarding power cable replacement by qualified personnel.

Maintenance and Parts

Cleaning and Component Care

Instructions for cleaning the device and care for carbon brushes.

Maintenance and Spare Parts Ordering

Information on maintenance needs and ordering replacement parts.

Disposal and Recycling

Storage Instructions

Service Information

Warranty Certificate Details