To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-TS 36/210 Li-Solo and is the answer not in the manual?
General| Soft start | Yes |
|---|---|
| Idle speed | 3800 RPM |
| Cutting height @ 45° | 45 mm |
| Cutting height @ 90° | 70 mm |
| Package depth | 580 mm |
| Package width | 660 mm |
| Package height | 330 mm |
| Package weight | 17760 g |
Weight and Dimensions| Weight | 13145 g |
|---|---|
| Table depth | 467 mm |
| Table width | 480 mm |
| Blade diameter | 210 mm |
Essential safety advice to prevent injuries and damage during operation.
Identification and listing of all parts and components of the saw.
List of accessories and parts supplied with the product.
Defines the intended purpose and limitations of the saw for optimal and safe operation.
Lists key technical details, power, dimensions, and weight of the saw.
Steps to take before operating the saw, including safety checks and initial setup.
General guidance for the initial setup and component assembly of the saw.
Instructions for fitting and replacing the saw's splitter component.
Steps to fit, change, and ensure proper function of the saw blade guard.
Detailed instructions for safely fitting and changing the saw blade.
Guidance on storing the cross stop, push stick, and wrenches when not in use.
How to connect a dust extraction system to the saw for debris removal.
Connecting vacuum extraction systems and adapter sets for dust removal.
Instructions for switching the saw on/off and adjusting cutting depth.
Guidance on using the parallel stop for making longitudinal cuts.
Adjusting stop height, cutting width, and stop length for precise cuts.
How to use and set the cross stop for making perpendicular cuts.
Adjusting the saw blade angle for performing bevel cuts.
Extending and securing the table width extension for larger workpieces.
Instructions for charging the Li battery pack using the provided charger.
Techniques for making cuts along the wood grain using the parallel stop.
Using push sticks for cutting narrow and extremely narrow workpieces safely.
Performing angled cuts using the parallel stop and adjusting the blade angle.
How to make precise cuts across the wood grain using the cross stop.
Procedures for cleaning, checking carbon brushes, and general maintenance.
Information required for ordering replacement parts and accessories.
Guidelines for safely transporting the saw and its accessories.
Proper methods for disposing of the equipment and packaging environmentally.
Recommendations for storing the saw and accessories in optimal conditions.
Explanation of LED indicators on the battery charger for status monitoring.
Details on service partners, wear parts, and consumables for the product.
Key terms, conditions, and limitations of the product guarantee.
Manufacturer's statement of compliance with relevant EU directives and standards.
