Ironing (steaming) methods
3. Connect the device to 220-240 V AC power sup-
ply.
4. Press the power button and the indicator light
should light up. You can start using the device after
120 seconds.
5. Switch the iron to “Steaming” mode by pressing
the button at the base of the iron handle to start
steaming. Press the button again to switch the iron
to descaling mode (See the “Maintenance” section).
6. While working the current steam pressure will
display on the pressure gauge in two units – bar and
psi (pound per square inch).
1. The basics of removing wrinkles with steam.
For the most effective ironing fabric bers need to
be stretched during steaming to dry them quickly.
This will help you get rid of any wrinkles better and
faster.
2. The device can be used both for ironing with
steam under pressure, and for steaming in hanging
position. It is recommended using an ironing net for
ironing with steam. Fix the item on the net and iron
it with a steam iron, it is equipped with a smooth
sole for this purpose.
3. If ironing in hanging position is necessary, it is recommended using a special
ironing glove to avoid burns. Take the handle of the vertical steamer in one
hand, hold the lower part of the clothing with the other hand (in a glove) making
a slight tension. Bring the steam sprayer to the fabric surface, lightly press the
metal sole of device against it, and steam the item in an up/down vertical mo-
tion.
22
To Next Page
Loading...