Using of protective plate
Using of brush
Filling the water tank
Warning
It is necessary to use a protective plate while ironing
delicate fabrics (synthetics, silk, etc.). The plate is
installed on the entire sole surface and provides
additional care for things.
It is necessary to use a brush attachment to achieve
the best effect while ironing eecy fabrics (mohair,
cashmere, velvet, wool). Install it on the sole, then
steam holding the handle with the nozzle at a 2-3
cm distance from the fabric.
When the tank runs out of water, the device will give a warning signal. Just ll up
the tank to continue working.
When installing and removing the protective plate
or brush from the steam iron, wear special thermal
glove to avoid burns.
23
To Next Page
Loading...