Maintenance
If you leave water in the tank for a long time, it can negatively affect the opera-
tion of device and signicantly reduce the quality of steaming.
Especially if you use hard water or water with impurities.
Please note that when the device is operated in high-temperature mode, scale
may form in the water. This is a natural process and it will not affect the quality
of work with regular device maintenance.
We recommend periodically activate the steam iron cleaning function:
1. Connect the appliance to a wall socket, turn it on, and use the switch on the
handle to switch the iron to «Descaling» mode.
2. When the steam pressure reaches 4 bar, press and hold the steam button.
Dirty water will come out of the holes on the sole.
3. Cleaning will be completed when the water coming out of the steam sprayer
is clear. The average duration of the process is 4-5 minutes.
4. Switch the button on the iron handle to the «Steaming» position. The appli-
ance will be ready to operate in steaming mode in 1 minute.
To prevent the internal parts of the device from interacting with water impurities
and sediment, we recommend you to open the drain cover and completely drain
the water from the tank after each use. This will extend the lifespan of appliance
and will help to avoid further deterioration of its operation.
To clean the appliance from scale:
1. Turn off the steamer and unplug it from the power supply.
2. Wait until the unit has cooled down (at least 2 hours).
3. Disconnect the steam hose and the telescopic pole.
4. Remove water tank and drain the water from it.
5. Place the base of the steamer over the sink or tub.
6. Turn the base over and unscrew the boiler plug.
7. Drain the water from the boiler into the sink or tub.
8. Fill the boiler with clean water and shake the appliance. Drain the water.
9. If necessary, repeat this step until the drained water is totally clean.
10. Screw the boiler plug.
11. Install tank into place, connect the steam hose and the telescopic pole.
24
To Next Page
Loading...