EasyManua.ls Logo

eisl DX12008 - Installation Instructions

eisl DX12008
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Mise hors service
Coupez l‘alimentation en eau avant de démonter le produit
• Attention à l‘eau résiduelle qui s‘écoule
Eectuez le démontage dans l‘ordre inverse de la notice
de montage
Les illustrations représentent le produit de manière
imagée. Il est possible que le produit ne corresponde pas
tout à fait aux illustrations. Sous réserve de modications
techniques.
GB
Installation instructions
Dear customer,
You have purchased a high-quality and long-lasting product
from our line of goods. Please read these instructions care-
fully before assembling and observe the notes.
Therefore, keep the instructions in a safe place and pass
them on to possible subsequent owners.
Proper use
This product is suitable for use with instantaneous water he-
aters. It is not suitable for low pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath geysers,
open electrically heated water tanks. Any use other than
that described here or modication to the product is not
permitted and may lead to damage to persons or property.
There is also the risk of injury and loss of life. The product
is intended for personal use only and not for medical or
commercial use.
Safety notes
Only allow experts carry out the installation work.
CAUTION DAMAGE BY WATER!
Prior to installation please turn the general water supply
o.
Ensure that all gaskets have the correct t.
These taps are not suitable for use on low pressure and
small electrical storage heaters.
We recommend the installation of a lter into the appli-
ance or at least the use of angle valves with lter, in order
to avoid the inow of foreign matter, which could damage
the cartridge.
This tap is only intended for use in private households!
Only suitable for use in rooms with a temperature over 0 °C,
when there is danger of frost, sut o the water supply and
empty the tap.
Take care when adjusting the warm water. Danger of
scalding!
Incorrectly installed ttings can cause water damages!
Please ensure that no caustic or corrosive products such as
detergents or household cleaning products make contact
with the connection hoses; this can lead to water damages.
Despite careful production, sharp edges can occur. Please
exercise caution!
DANGER OF LOSS OF LIFE AND ACCIDENT TO INFANTS
AND CHILDREN! Never leave children unsupervised with
the packaging materials. Danger of suocation.
CAUTION! DANGER OF INJURY! Please ensure that no
parts are damaged and that all parts are correctly assem-
bled. Incorrect assembly or tting may lead to injury.
Damaged parts can adversely aect safety and proper
function.
• Risk of injury in case of damage to the shelf.
CAUTION DANGER OF WATER DAMAGE! Before installation
please ensure that there are no water pipes where you are
intending to drill.
Examine the wall before installation and choose suitable
installation xings.
We have supplied xings suitable for an ordinary solid
masonry wall.
Please note that seals are wear parts and therefore will
require to be replaced from time to time.

Related product manuals