EKEN M50 - Log In to the Aiwit App; Set Up Doorbell in Aiwit App; Enable Bluetooth on Phone; Sign In to Your Aiwit Account

Set up your doorbell in the Aiwit app
Re-open the Aiwit app, enter your email address and
password, and tap Log in.
5.
:HOFRPH
/RJLQ
(PDLO$GGUHVV
3DVVZRUG
)RUJHW3DVVZRUG
5HPHPEHUPH
/RJLQ
6LJQXS
Open the Aiwit app and sign in to your account.
1.
To add your camera, tap the Add device icon (+).
2.
Choose Video Doorbell and then select the M50 model.
3.
Press and hold the doorbell button until the red light
starts flashing. You will hear Entering pairing mode.
4.
The device supports only the 2.4GHz Wi-Fi network.
Navigate to your cellphone's Wi-Fi settings, connect to
a 2.4GHz Wi-Fi network, and tap “Yes.” (Note: 5GHz
Wi-Fi is not supported).
5.
For Connection Setup: Select your 2.4GHz Wi-Fi
network name, input the password, and tap Next.
6.
Tap Confirm.
7.
8.
Use the device’s camera to scan the QR code on your
phone.
9.
Once you hear Device registration successful, you are
all set.
10.
Before setting up the camera, ensure your cellphone's
Bluetooth（ ）is turned on