Need help?Do you have a question about the EKEN M50 and is the answer not in the manual?
General| Image Sensor | CMOS |
|---|---|
| Resolution | 20MP |
| ISO Range | 100-1600 |
| Video Resolution | 1080p |
| Image Format | JPEG |
| Waterproof | No |
| Storage | MicroSD card |
| Battery | Rechargeable lithium-ion battery |
Detects motion for alerts and recording.
Provides a broad field of view for the camera.
Visual status indicator for device operation.
Outputs audio for two-way communication.
Captures audio for recording and communication.
Enables night vision for clear low-light recording.
The button users press to ring the doorbell.
Used to restore the device to factory settings.
Port for charging the device's battery.
The main doorbell camera unit.
Tool for detaching the doorbell from its mount.
Cable for charging the doorbell.
Documentation for device setup and operation.
Indoor audible alert device for the doorbell.
Device is disconnected from Wi-Fi.
Device battery is low, requires charging.
Device is currently recording.
Step to detach the doorbell from its mounting base.
Action to disconnect the battery for charging.
Instructions for charging the doorbell before first use.
Get the Aiwit app from app stores.
Register a new user account in the Aiwit app.
Provide credentials for account creation.
Confirm email address using activation link.
Access your account after registration.
Ensure Bluetooth is active for setup.
Access the app with your credentials.
Initiate the device addition process.
Choose the correct doorbell model from the list.
Activate pairing mode on the doorbell.
Select your Wi-Fi network for device connection.
Confirm Wi-Fi network details.
Use doorbell camera to scan QR code on phone screen.
Confirmation of successful device setup.
Detach the doorbell from its mounting base.
Drill holes and install anchors for the back plate.
Secure the doorbell onto the mounted back plate.
Access the reset button by removing the bracket.
Initiate factory reset by pressing the button.
Ensure the doorbell is connected to your phone.
Connect the chime unit to a power outlet.
Activate the chime's pairing mode.
Press the doorbell button to establish connection.
How to share doorbell access with family members.
Understanding owner vs. shared account capabilities.
Maximum users viewing or using the intercom simultaneously.
Confirming that only 2.4GHz Wi-Fi is supported.
Tips for improving Wi-Fi signal strength.
Reasons for the doorbell being disconnected.
Configuring sensitivity for motion detection accuracy.
Setting up alerts for motion or doorbell rings.
Information on contacting customer support via email or app.
Regulatory compliance details for the device.
To Next Page