EKIZNSN F073 - Wiring Preparation

2
2
Wiring Preparation
2
1. Rotate the bottom
cap to secure it to the
blades, then secure
the side bolt into the
cap with a hexagon
wrench in case of the
blades falling or loosen
Tips:
Seek the help of another person to hold the stepladder in place and to
lift the fan up to you once you are set on the ladder.
J-HOOK
2. Lift fan towards the
ceiling to suspend
from mounting bracket
using security cable
loop and washer hook.
Then you can start
wiring without holding
the fan body.