ELABO G1-1 - User Manual

To Next Page

TestSystems

Service

Calibration at ELABO

Calibration at customer premises

Test units on loan

ELABO GmbH, Hotline ++49 7951/307-202

www.elabo-testsysteme.com

Operating

instructions

HV DC-Tester G1-1

Full-electronic

High Voltage-Tester

Main Page

Table of Contents2
Operating Elements6
Info about Device Versions and Options7
Introduction9
General Information9
Abbreviations and Symbols10
Short Description of the Testers10
Standards Supported12
Name Plate12
Safety Instructions13
Markings for Safety Instructions and Warnings13
Warranty13
Use as Per Specifications and Exclusion of Liability14
General Rules of Conduct and Safety Instructions14
Protective Facilities / Emergency off15
Operator Qualifications15
Working Clothes (Personal Protection Equipment) and Protection at Work15
Maintenance16
Moisture and Humidity16
Compliance with the Technical Data16
Physical/Design Changes to the System/Device16
Other Information16
Information on the High Voltage17
Discharging Test Objects with Internal Capacitance17
Putting into Operation19
Transport and Installation19
Ambient Conditions19
Installation in Housing or Rack19
Connection to the Connection Box / Connection Panel / Test System20
Requirements for Connecting Lines to the Test Object21
Cable Length21
Mains Connection22
Using and Controlling22
Connection to the Computer22
Operating Touchscreen Display23
Entering Arbitrary Numerical Values23
Entering Arbitrary Text24
Password Protection25
Password Level 125
Password Level 225
Password Level 325
Switching on27
Changing Language28
State Past Switch on Hv/Is29
Switch on Hv/Is30
STATES IS (Only DC-Devices)31
Contact Monitoring32
SAFETY CIRCUITS SK1 and SK233
Fault in the Device's Safety Circuit33
Operating Modes34
Fast-Start-Mode or Normal-Mode35
Normal-Mode Test Sequence36
HV/IS-Test Normal Mode37
Normal Mode Input Step38
Normal Mode Output Step39
Normal Mode Time Step40
Fast-Start-Mode Test Sequence41
Fast-Start-Mode HV-ISO-Test42
Error Messages43
Connections / Interfaces44
Power Connections44
High Voltage44
X3 LEMO High Voltage Socket (Option E09)45
X6 Warning Lamp Set 94-2C or Signal Column F9-1A Connection45
Interfaces46
Ethernet-INTERFACE X946
Usb-Nterface X946
Rs232 Interface X946
Service-INTERFACE X9A (RS232)46
Digital Interface X747
Outputs47
Inputs49
DIO - Additional Digital Interface (Option)50
XS8 - Expanded Digital/Analog Interface (Option)50
Accessories and Attachments53
Test Cabinet (Option)53
Warning Lights 94-2C / F9-1A54
Test Probes 94-2A54
Maintenance and Care55
Fuse Replacement55
Caring for the Housing55
Caring for the Touchscreen Display55
Technical Data56
Device-Specific TECHNICAL DATA56
Common TECHNICAL DATA57
Interfaces, Miscellaneous57
Touchscreen Display Menu System58
General58
Overview, HV Test Example59
Main Menu60
Manual Test61
Manual Test with Actual Parameter62
Load Parameter64
Parameter Set Management66
Load Parameter Set67
Edit Parameter Set69
Create Parameter Set70
Delete Parameter Set71
Test Plan Management and Automatic Testing72
Load Test Plan / Auto Testing74
Automatic Test76
Fault Handling Auto Test78
Edit Test Plan80
Create Test Plan81
Delete Test Plan82
Setup (Device Parameter)83
Pass Word Definition85
Test Parameters90
Parameters for High Voltage Test90
Parameters Insulation Resistance Test Iso94
Time-Step98
Calculation of the Idle Time (Hv / Iso)99
Optional Outputs / Inputs100
Base Settings Outputs/Inputs100
Digital Output/Input Setup102
Analog Outputs/Inputs103
Additional Digital Interface Option G1-1 E06105
Expanded Digital/Analog Interface Option G1-1 E07106
Create Parameter Blocks107
Digital Outputs108
Analog Output109
Digital Inputs (Input)111
Analog Inputs112
Create Test Plans (Input/Output)114
Load and Execute Test Plans (Input/Output)115
Start /Execute Test Plan (Auto- Mode)115
Read Digital Input116
Read Analog Input116
Set Digital Output117
Set Analog Output117
Start /Execute Test Plan (Step Mode)118
Read Digital Input118
Read Analog Input118
Set Digital Output119
Set Analog Output119
Elabo Lite-Software120
Commandline Tool120
Flash-Programer for Firmware Update120
Driver Test (Treiber Test)120
Result Explorer/Messwertspeicher Auslesen120
Rs-Config / Serial Interface Rs232121
Translation Tool121
Fast-Start-Mode122
Prerequisites for Use of the Fast-Start Mode122
Restrictions on Fast-Start Mode122
Glossary122
Starting Position122
Activating Fast Start Mode123
Parameterization of the Test123
Teaching the Unit123
Starting the Test124
Fast-Start-Mode Voltage Time Diagram124
Proceedings of the Circuit124
More Features125
Fast-Start-Mode Overview125
Fast-Start-Mode Status Display126
Fast-Start-Mode Overview128
Options and Add-Ons for the Devices129
Option E03 Safety Current Limitation for Ac- Tester130
Voltage Read-Back Unit E04 (Only DC-Types)131
Back132

Need help?

Do you have a question about the ELABO G1-1 and is the answer not in the manual?

ELABO G1-1 Specifications

General

Brand	ELABO
Model	G1-1
Category	Test Equipment
Language	English

Related product manuals

ELABO G1-1 - User Manual

Table of Contents

ELABO G1-1 Specifications

Related product manuals