Elan HR2 - Page 13

13 of 13
4. Roaming – having two or more Access Points
If there are two or more Access Points, the HR2 will connect to the Access Point with the
strongest signal (usually the closest one). The only exception to this is if there is heavy traffic on
the closest Access Point, the HR2 may connect to the next closest (strongest signal) Access
Point. Access Points with heavy traffic may not respond quick enough to the HR2 request for
connection so the HR2 will seek out another Access Point.
While connected to the weaker signal, the HR2 performance may be degraded slightly. Once the
HR2 goes to sleep and is awoken at a later time, it will attempt to connect to the stronger signal.
If the nearest Access Point is not under heavy traffic at this time, the HR2 will connect to this
Access Point.