Elari FixiTime - Application Usage; Account Registration; Adding a Tracker

Opening Wherecom on your smartphone and signing up
To run the application for the rst time you need to create an
account. To do this, click on «Registration», enter your e-mail
address and click «Get the code». Wait until you receive the
conrmation code on the specied e-mail address. Enter
the code in the «Conrmation code» eld, create and enter
a password (6 characters minimum) and press «Save». On
subsequent runs of the application, you will be able to log in
using the e-mail address you provided during the registration
and the password.
Adding a tracker
After registration, you will be asked to add a tracker («Add a
tracker») or check the interface and the functionality of the
application («Demo»). Click «Add a tracker» to start the relevant
procedure. To add a tracker you must specify the IMEI code of the
watch and the telephone number of the SIM card installed in it.
The easiest way to obtain the IMEI code is to scan the barcode on
the watch storage box. To scan a barcode, place the code image
in a viewnder of your smartphone.