After reading the barcode successfully, the phone will transfer
you to a text input screen for entering your phone number (the
eld with the IMEI code will be lled in). You can also enter the
IMEI code manually. To do this, click «Add manually». To nd out
the IMEI number, turn on the watch, press the power button for
the signal and the battery levels to appear on the screen, and
then quickly click the power button 3 times in a row. Software
version together with the code will be displayed on the screen
as a scrolling text.
Enter the code number in the relevant eld on the phone display,
then enter the phone number of the SIM-card installed inside
the watch and click «Next». The phone will send a text message
with the command on your watch. Within 30 to 60 seconds a
four-digit conrmation code will appear on the watch display.
Enter the code in the relevant eld of your phone application.
If the code you entered is correct, the tracker will be added suc-
cessfully and you will be automatically transferred to the prole
editing page enabling you to change user information (name,
date of birth, weight, height, prole photo, etc). Thus, your rst
tracker has been added and you can track its current location on
the map as well as exploit other features.
To Next Page
Loading...
