Page 2 of 7
INTRODUCTION
This guide provides an overview of TWN4 CONFIG Programmer.
The contents of the package are as follows:
+ TWN4 CONFIG Programmer
+ TWN4 CONFIG Cards (10 pcs)
+ USB memory stick
+ Snap-in holder
TWN4 CONFIG Programmer Firmware V1.00
REQUIREMENTS
TWN4 CONFIG Cards can only be used with TWN4 readers that are compatible with Firmware V3.04 or
later. Please refer to the TWN4 System Overview located in Docs folder of the TWN4 Developer Pack 3.04.
TWN4 reader compatible
with TWN4 Developer Pack 3.04
To Next Page
Loading...