Using your dryer
5oSelecting the dryness level
The desired dryness level can be altered.There are two dryness levels to choose between:
LESSDRY
Refer to page 28 for dryness level descriptions.
At the end of the cycle, if the clothes are still damp or are too dry, next time just adjust the
dryness level on the timer to meet your personal preferences.
6o Selecting the drying process
There are two ways in which your dryer is able to dry clothes; by using automatic drying or by
using T_MED DRY.
Automatic drying
When automatic drying is selected the dryer automatically senses the dryness level of the
load and turns off when the clothes are dry.The dryer's internal computer measures the
moisture content of the load using metal sensing bars and together with a temperature
sensor determines when the clothes have reached the selected dryness level (Refer to above -
'Selecting the dryness level').
For optimum clothes care, match the cycle to the load. Automatic drying often provides the best
results and leads to lower energy costs than T_MEDDRY.
Note: as automatic drying relys on items of the load contacting sensors, it will not work when
the drying rack accessory is used.
T_MED DRY
There are three timed cycles. You can choose between 40, 60 and 80 minutes. A COOLDOWN
period of 10 minutes is included in the three cycles.
To select a timed cycle, set the cycle selector dial at the desired drying time you want your dryer
to run for. Throughout the cycle, the cycle selector dial will rotate towards the end of the cycle.
During TIMED DRY,the dryer does not sense when the clothes are dry, This may cause over°
drying, We recommend that you dry your clothes for a shghdy shorter time than you think
they need, or check on them regularly (to avoid over,_drying)o
To Next Page
Loading...