3
PRODUCT DESCRIPTION
USING THE COFFEE MAKER FOR THE FIRST TIME
1. Remove all packaging materials and make sure the appliance is received in good
condition. Tear up and discard all plastic bags as they pose a risk to children.
2. Clean the glass jug and filter thoroughly with clean water. Wipe body clean with damp
cloth.
Note: Do not immerse the appliance, cord and plug in water or any others liquids.
3. Place the appliance on a flat and stable surface.
4. Connect the plug to the wall outlet.
Note: Make sure the cord is not contacted with hot surfaces.
5. Fill up the water tank with water up to the “MAX” marking (refer to the water level
indicator), boil and discard the water for two times.
OPERATING THE COFFEE MAKER
1. Open the water tank cover. Fill water into the water tank until the level indicator shows
desired level.
Note: Refer to the water level indicator for the maximum water level marking and never
exceed the “MAX” mark.
2. Make sure the filter basket is inside the filter holder. You may use filter provided or line
it with a store-bought paper filter. Add coffee ground into the filter. The standard recipe
is one spoon of coffee ground for each cup of water, however, the amount of coffee
ground can be adjusted to your taste and is dependent upon type of coffee, fines of
grounds and flavor of coffee desired.
Note: Make sure that the filter basket is inserted properly onto the filter holder,
otherwise the filter cover cannot be closed securely.
To Next Page
Loading...