Elba EGH-B9230G - Technical Data; Instructions for the Installation Technician

TECHNICAL DATA
Dimensions in mm:
Installation opening L x P 1、 550 x 470
2、 550 x 470
3、 750 x 470
BURNER
TYPE
MAX
OUTPUT
MIN
OUTPUT
G20
20mbar
G30
28-30mbar
G30
50mbar
Kw
Kw
Nozzle
Making
mm
Cons
M
3
/h
Nozzle
Making
mm
Cons
g/h
Nozzle
Making
mm
Cons
g/h
Small
Auxiliary
burner
1.00
0.35
0.72
0.095
0.50
73
0.43
73
Medium
Semi-rapid
Burner
1.75
0.65
0.97
0.167
0.65
127
0.58
127
Large
rapid
burner
3.0
1.0
1.15
0.286
0.85
218
0.75
218
Triple
flame
burner
3.80
1.9
1.35
0.362
0.98
277
0.77
277
Gas intake connection G1/2″
Electricity supply 220-240v~50/60Hz
INSTRUCTIONS FOR THE INSTALLATION TECHNICIAN
CAUTION: This appliance must only be installed and used in rooms
with permanent ventilation to local standards.
Installation of the appliance and its connection to the electrical mains
must only be carried out by qualified technician.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains. The Manufacturer
declines all responsibility for any damage arising from installation in
breach of the regulations in force or from failure to comply with the
accident prevention regulations.
8