To Next PageTo Next Page
Need help?Do you have a question about the Elcontrol NanoVIP Plus Mem and is the answer not in the manual?
General| Harmonic Analysis | Up to 50th harmonic |
|---|---|
| Display | LCD |
| Communication | RS-232, USB |
| Accuracy | ±0.5% |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0 to 90% non-condensing |
Details the function for recording automatic measures in internal serial memory, including setup options.
Describes the addition and control of backlighting for the LCD display, with various ON/OFF modes.
Explains the command to restore the instrument's default settings for various configurations.
Details the display of Active Power relative to the selected harmonic, alongside V, I, and Power Factor.
Describes the serial line downloading of voltage and current waveforms with their data format.
Explains the autoscroll feature for harmonic display during measure logging cycles.
Details the Modbus command for setting the immediate calculation of a determined harmonic.
Notes the addition of a socket for an external DC feeder with specific output specifications.
Details data format for RMS measurements including voltage, current, power, and frequency.
Details data format for MEM measurements including saved voltage, current, and power differences.
Details data format for PEAK measurements including min/max voltage, current, and power.
Details data format for THD, Ripple, and Harmonic measurements including voltage, current, and cosphi.
