EasyManua.ls Logo

ELCOS CEM-370 - Stopping the Engine Pump; Instrument Functions

ELCOS CEM-370
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ELCOS SRL - Parma - EN - CEM-370 /1
4
OPERATION
Is activated with key in AUT the display shows the phrase .
The duration of the preheating action can be set.
Is indicated on the display when the action has ceased .
The control unit shut down the engine in three conditions:
- turning the starter key onto “ZERO”.
- protection intervention.
- timer intervention at the end of the work period.
The unit adapts to two different stop system:
- by working the ELECTROMAGNET for 20 seconds which pulls the STOP lever.
- by cutting off power to the SOLENOIDVALVEshutting off the flow of fuel.
GLOW PLUGS PREHEATING
FACTORY-EXCLUDED
STOPPING THE ENGINE PUMP
GLOW PLUGS
PREHEATING
ENGINE
STARTING
EMERGENCY STOP
Always enabled, allows if necessary the motor pump to be operated for a settable time (maximum 96 hours), at the
end of which it is stopped and on the display the end of work time indicator comes on.
The work time is set by pressing the push-button ( lights up) until the desired value appears on
the
DISPLAY .
On releasing the push-button, the timer automatically starts working, continously displaying the remaining
work time.
CANCELLING THE SET TIME
To zeroing the set time, to keep the push-button pressed until it reaches zero.
OPERATION TIMER
The emergency stop can be actived in all working conditions, by mounting one or more
click-down push-button. On the display it’s reported
EMERGENCY
STOP
.
GENERAL ALARM
This can be obtained by fitting on the outside an optical and/or acoustic signaller to be
connected to its connector.
It is activated on protection intervention.
RESET: is obtained by turning the starter key back onto “ZERO”.
INSTRUMENT
The control unit comprises four instruments which can be selected in sequence by pressing the button
HOUR-METER
-Total hours of operation (with the engine running the signal : pulsates
to indicate the correct functioning of the HOUR-METER.
PRESSURE GAUGE - Pressure water pump
TACHOMETER
- Speed of motor pump
FUEL LEVEL INDICATOR - Fuel level percentage
VOLTMETER - Battery voltage
}
ON REQUEST