Eldes EWP3 - Page 18

18
EWP3 WIRELESS MOTION DETECTOR
2. CONFIGURING AND PAIRING WITH THE SYSTEM
ELDES
Coniguraion
sotware
For more details on how to conigure and pair the device with the system, please refer to ELDES Coniguraion
sotware’s documentaion or ELDES alarm system’s installaion/user manual located at www.eldesalarms.com
If you are unable to pair the wireless device, please restore the parameters of the wireless device to default and try again (see 7. RESTORING
DEFAULT PARAMETERS for more details.)
Once the 5-second period ater the batery acivaion has passed, EWP3 device will start indicaing the pairing status. Single long lash
of the indicator (approx. 1 sec. length) represents the unpaired wireless device status suggesing the device can be paired with the alarm
system, while the 3 short lashes represent the wireless device that is paired with the alarm system.
3. EWP3 ZONE AND TAMPERS
Upon successful EWP3 pairing process, the system adds 1 wireless Instant zone intended for movement detecion.
In case of tamper violaion, the alarm is caused regardless of system being armed or disarmed. There are 2 ways to detect tamper violaion on EWP3:
By tamper switch. EWP3 comes equipped with 2 built-in tamper switches intended for enclosure supervision:
• one located on the front side of the PCB supervising the front cover in case it is illegally opened.