Eldes EWP3 - Safety Instructions

To Next Page

To Previous Page

EWP3 WIRELESS MOTION DETECTOR

SAFETY INSTRUCTIONS

Please read and follow these safety guidelines in order to maintain safety of operators and people around:

• DO NOT use the device where it can cause potenial danger and interfere with other devices – such as medical devices.

• DO NOT use the device in hazardous environment.

• DO NOT expose the device to high humidity, chemical environment or mechanical impact.

• DO NOT atempt to repair the device yourself – any repairs must be carried out by fully qualiied personnel only.

• EWP3 can be powered by a single Primary 3V Lithium 1500mAh CR123A batery. When insering the batery into the batery slots, mind the

polarity terminals!

• A blown fuse cannot be replaced by the user. The replacement fuse has to be of the kind indicated by the manufacturer (fuse F1 model –

MINISMDC050F 0.5A).

• The device is not meant for outdoor use, i.e. you should use it inside a building. Protect the device against cold, heat and keep away from direct

sunlight while in storage or operaion.