To Next PageTo Next Page
Need help?Do you have a question about the Ele ADR-Auto 2000kN BS and is the answer not in the manual?
Details connecting hydraulics and ram travel limit switch leads.
Covers checking oil level and bleeding the hydraulic system.
Steps to check oil level, noting plug location and required oil grade.
Process for bleeding air from the hydraulic system using a bleed screw.
Overview of the front panel interface, including display, keypad, and function keys.
Safety precautions and UK power connection details.
Procedure for powering on the machine and initial self-checks.
Details mode selection for single/dual frame systems and manual changeover.
How to set options like Display Units, Pace Control, Sample Log, and Print.
Defines units for load, pace, dimensions, weight, and density (SI, Imperial, Metric).
Explains Manual, Automatic, and Board pace control modes.
How to enable automatic zeroing of load before test.
How to configure dual pace rates for specific frame types.
Defines the load level at which failure detection begins.
How to set the percentage for detecting sample failure.
How to select sample type and size from the database.
Lists available sample types and how to select them.
How to select specific dimensions for a chosen sample type.
Method to reset current operating mode to default values.
How to set the pace rate for a test, including dual rates.
How to enter sample type, reference, dimensions, weight, and density.
How to alter standard sample dimensions for calculations.
Steps to place sample and start the test after setup.
How to tare the load automatically or manually.
Explains the three pacing control methods: Automatic, Manual, and Board.
Detailed explanation of the automatic pacing control.
Detailed explanation of manual pacing control.
Accessing calibration and test facilities via menu.
Details connecting hydraulics and ram travel limit switch leads.
Covers checking oil level and bleeding the hydraulic system.
Steps to check oil level, noting plug location and required oil grade.
Process for bleeding air from the hydraulic system using a bleed screw.
Overview of the front panel interface, including display, keypad, and function keys.
Safety precautions and UK power connection details.
Procedure for powering on the machine and initial self-checks.
Details mode selection for single/dual frame systems and manual changeover.
How to set options like Display Units, Pace Control, Sample Log, and Print.
Defines units for load, pace, dimensions, weight, and density (SI, Imperial, Metric).
Explains Manual, Automatic, and Board pace control modes.
How to enable automatic zeroing of load before test.
How to configure dual pace rates for specific frame types.
Defines the load level at which failure detection begins.
How to set the percentage for detecting sample failure.
How to select sample type and size from the database.
Lists available sample types and how to select them.
How to select specific dimensions for a chosen sample type.
Method to reset current operating mode to default values.
How to set the pace rate for a test, including dual rates.
How to enter sample type, reference, dimensions, weight, and density.
How to alter standard sample dimensions for calculations.
Steps to place sample and start the test after setup.
How to tare the load automatically or manually.
Explains the three pacing control methods: Automatic, Manual, and Board.
Detailed explanation of the automatic pacing control.
Detailed explanation of manual pacing control.
Accessing calibration and test facilities via menu.
General| Brand | Ele |
|---|---|
| Model | ADR-Auto 2000kN BS |
| Category | Air Compressor |
| Language | English |
