To Next PageTo Next Page
Need help?Do you have a question about the Ele ADR-Auto Series and is the answer not in the manual?
General| Brand | Ele |
|---|---|
| Model | ADR-Auto Series |
| Category | Air Compressor |
| Language | English |
How to choose between different operating modes for the ADR-Auto system.
Procedure for adjusting the load application rate before or during a test.
Adjusting the load application rate before starting a test.
Essential checks to perform daily for machine upkeep.
Guidelines for verifying the accuracy of load measuring systems.
Detailed specifications for the ADR-Auto console including dimensions and capacity.
Guidelines for safe handling and positioning of the ADR-Auto frames.
Specific steps for moving and positioning the 250kN compression frame.
Specific steps for moving and positioning the 1500, 2000, and 3000kN frames.
Instructions for moving and positioning the ADR-Auto console unit.
Steps to connect hydraulics, limit switches, and power.
Procedure for checking oil level and bleeding air from the hydraulic system.
Description of the front panel, including display, keypad, and function keys.
Details on the two operating modes and how they apply to different frame configurations.
Explanation of the functions performed by the four main control keys.
How to use the keypad for data entry and navigation.
Safety precautions related to electrical connections and supply.
Steps to select and change the ADR-Auto's operating mode.
Setting specific parameters and options for the selected operating mode.
Selecting measurement units (SI, Imperial, Metric) for load, dimensions, etc.
Choosing how the ADR-Auto controls the pace rate (Automatic, Manual, Board).
Setting parameters for detecting sample failure and its percentage.
Viewing and confirming sample type and shape information.
Entering or modifying the reference identifier for the current test.
Procedure for placing the sample and initiating the load application.
Understanding Automatic, Manual, and Board pacing control methods.
How the system detects and reports a sample failure.
Accessing password-protected facilities for calibration and testing.
