Elecom WRC-1167GHBK3-A - User Manual

■Nameandfunctionofeachpart
Checkthelitstatusofthelamps.
•Checkthatthelampsonthemodemorsimilardevice
andthisproductarelitcorrectly.
Connectthedevices.
Refertothediagramandwirethedevices.
Terminaldevice
(cableTVmodem,
ONU,CTU,ADSL)
LANcable
INTERNETport(blue)
*Verticalorientation
POWER:Lit
INTERNET:
Blinking
*Thereisno5GWLANlampontheWRC-300FEBK2-A.
❶Connectthepowercableoftheterminaldevice.
・Ifapowerswitchispresent,slidetheswitchtotheonposition.
❷Connecttheincluded
ACadaptertothisproduct.
Turnontheterminaldeviceandthisproduct.
■Usingthisproductinroutermode
Setup Guide
WRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A・
WRC-300FEBK2-A
Installationmethodandprecautions
Thestandisnotfixedtotheproduct.Connectthecablestotheproduct,
andthensettheproductintothestand.
Thisproductcanbeinstalledverticallyorhorizontally.Witheitherorienta-
tion,besuretostabilizetheproductbysettingitintotheincludedstand.
Also,witheitherorientation,takemeasurestopreventtheproductfrom
fallingoverandthecablesfrombeingpulledout.Theproductfallingover
orthecablesbeingpulledoutfromtheconnectorswhiletheproductisin
operationmayleadtomalfunctionsordataloss.
◆Verticalorientation
•UsethesidewiththeLEDlampsasthefront.
•Refertotheillustrationandsettheproduct
intotheincludedstandsothatthebackofthe
product fits snugly in the grooves on the
stand.
◆Horizontalorientation
•UsethesidewiththeLEDlampsasthetop.
•Placetheproductontheincludedstandso
that the product is on top of the center,
backpartofthestand,andthenensurethat
theproductissteady.
Thismanualprovidesasummaryofandthespecificationsforthisproductaswellasexplainsthisproduct'susage
precautions.
ItalsocontainsanFAQthatexplainsactionsyoucantakeifyouhaveproblemssuchastheproductmalfunctioning.
NotethatthismanualiscommonfortheWRC-1167GHBK3-A・WRC-F1167ACF2・WRC-1167FEBK-A・WRC-733FEBK2-A・
WRC-300FEBK2-A(whichonlysupports2.4GHz).TheWRC-300FEBK2-Adoesnotsupportthe11ac/11a(5GHz)standards.
Back
Back
Back
❶ToanACoutlet
ACadapter
ACoutlet
WPSlamp
(red)
Blinking:
Off:TheWPSfunctionisnotrunning.
TheWPSsettingbuttonhasbeenpressed,andtheWPSfunctionisrunning.
Thislampblinksonceevery0.5secondforapproximately2minutes.
POWERlamp
(white)
Lit:Theproductison.
Off:Theproductisoff.
2.4GWLANlamp
(white)
5GWLANlamp
(white)
WPSsetting
button
Resetbutton
LANport/
LANlamp
1-4(white)
INTERNETport/
INTERNETlamp
(white)
DCIN
( powersupplyjack)
Stand
Leftside Back
Theselampsindicatetheconnectionstatusofthe2.4GHzband(11n/g/b)andthe
5GHzband(11ac/n/a).*TheWRC-300FEBK2-Aonlysupportsthe2.4GHzband
(11n/g/b).Thereisno"5GWLANlamp."
Lit:Thecorrespondingbandcanbeused.
Blinking:Thecorrespondingbandisinuse.
Off:Thecorrespondingbandisdisabled.
Usethisbuttonwhenyouareconnectingtheproducttoawirelessslavedevice
(suchasawirelessadapter)thatisequippedwithaWPSfunction.
Tousethisfunction,pressthisbuttonfor2secondsormore.
Whenyoupressthis button for approximately5 seconds, theWPSlamp blinks
andtheproduct'ssettingsareinitialized(returnedtothefactorydefaultvalues).
Donotturnofftheproductuntilthelampstopsblinking.
UsetheseportstoconnectthisproducttoPCsorothernetworkdevicesovera
wiredLAN.ThereisanLEDlampnexttoeachport.
Lit:ThelinktothePCornetworkdeviceconnectedoverawiredLANhasbeen
established.
Blinking:Dataisbeingtransferred. Off:Thecableisdisconnected.
ConnectthecablefromtheWAN(Internet)deviceofthemodem(ONU,CTU,and
othertypes).ThereisanLEDlampnexttotheport.
Lit:ThelinktotheWANdevicehasbeenestablished.
Blinking:Dataisbeingtransferred. Off:Thecableisdisconnected.
ConnecttheACadapterincludedwiththisproducttothisjack.Donotconnect
anyACadaptersotherthantheoneincludedwiththisproduct.
Youcanusethestandincludedwiththisproducttoorientitverticallyor
horizontally.Fordetailsonhowtousethestand,see"Installationmethodand
precautions"below.

Summary

Device Overview and Functions

Device Components and Indicators

Details the function and status indicators of various device parts like lamps, buttons, and ports.

Using This Product in Router Mode

Connecting Devices for Router Mode

Instructions for wiring terminal devices, modems, and the router using LAN cables.

Powering On Devices

Steps to power on the terminal device (modem) and the router correctly.

Verifying Indicator Lamp Status

Guidance on checking the status of indicator lamps for correct device operation.

Configuring Settings via Smartphones and Tablet PCs

Simple Setup Process via Mobile App

Step-by-step guide for configuring the router using the SkyLink Manager app.

Elecom WRC-1167GHBK3-A Specifications

General

Model	WRC-1167GHBK3-A
Category	Wireless Router
Frequency	2.4GHz / 5GHz
Maximum Wireless Speed	1167 Mbps
Wired WAN Port	1 x 10/100/1000 Mbps
Antenna	External
Wireless Standard	IEEE802.11a/b/g/n/ac
Frequency Band	2.4 GHz
Ports	4
Wired LAN Ports	4
Security	WPA2-PSK