7
USING THE COOKTOP BURNERS
The hob part of the appliance is controlled via knob with 7
positions on the control panel. Position ‘’0’’ means off position.
The remaining 6 positions indicate the following types of use:
1 : Heat maintenance position
2-3 : Heating in low temperature position
4-5-6 : Cooking, frying and boiling position
The knob rotation direction may differ according to the product
specication.
Surfaces of hotplates are covered by a protective layer. At rst
use, operate the hotplates without a pan at level 3 for 5 minutes.
Pans with at base are highly recommended. Also size of pan
must be in line with the size of hob heating elements for most
efcent usage. Always center the pan on the heating element.
Using small sized pans on the large sized heating elements will
cause heat loss and so energy will be wasted.
To Next Page
Loading...
