WARNING: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of re, electric
shock or damage to persons.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
Maintenance
Light Bulb Replacement
Allow at least ve (5) minutes for
the light bulbs to cool off before
touching to avoid accidental
burning of the skin. Light bulbs
needs to be replaced when you
notice a dark section of the ame
or when the clarity and detail of
the log exterior disappears.
There are two (2) bulbs located
under the Log Set which generate
the ames and embers.
Tools Required: Phillips
screwdriver
Figure 2
Operation
Battery
Battery Cover
To Next Page
Loading...
