6
ASSEMBLY
Ensure that the mini scooter is fully assembled before operating.
Step on the deck of the unit and
lift the handlebar stem firmly to
detach from the deck.
Remove the rubber plugs on both sides of
the front wheel forks, then unfasten the
front axle with the two 6mm wrenches
provided.
When installing the front wheel pay
attention to the direction of the tread,
ensuring it matches the image with the
valve on the right. Once you have
confirmed it is the correct way round,
the front axle can then be tightened.
Replace the rubber plugs on both sides of
the front wheel forks.
To Next Page
Loading...
