7
HANDLE ASSEMBLY
Fully tighten the handlebars on to
each side of the handlebar stem,
Ensuring that the right handle is
attached to the right side, and the
left handle is attached to the left.
UNFOLDING YOUR SCOOTER
Lift up the handlebar stem until the
folding hook releases from the hook hole
on the back fender.
Fully raise the handlebar stem, then
Lock the handlebar stem into place
using the handlebar buckle. Ensure a
clicking sound is heard and that the
buckle is secure.
FOLDING YOUR SCOOTER
Carefully lift up the handlebar buckle,
and pull it away from the handlebar
stem. Then gently lower the handlebar
stem until the folding hook is fixed
securely into the hook hole.
To Next Page
Loading...