6. Once the time is set, it begins to count down
immediately. The display will show the remaining
time.
7. When the time is up, a buzzer will beep for 30
seconds and the timer indicator will show “- -” .
USING THE TIMER WITH MULTIPLE COOKING ZONES
1. Select the heating zone that you want to set the
timer for.
2. Touch the timer control. The “00” will show in the
timer display. And the “0” flashes.
3. Set the time by touching the slider control
4. Touch the timer control again, the “0” will flash.
5. Set the time with slider control. Now for example
the timer is set at 95 minutes.
6. Once the time is set, it will begin to count down
To Next Page
Loading...