9
THE CERAMIC BOARD
Your microwave is supplied with a removable ceramic board, you can install or remove it
following the steps below:
TO INSTALL THE CERAMIC BOARD :
1. Unplug the microwave. Do not install the
ceramic board until the cavity has cooled
down to prevent burns or scalding.
2. Hold the ceramic board with both
hands and gently slide it along the
groove, to prevent damage to the
microwave or board. Please make
sure the board is installed between
the grooves, not above them. And
the board’s warning is visible and on
the front of the board.
3. Please ensure the ceramic board is pushed in fully to the end of the cavity. If it is
incorrectly installed it may prevent closure of the microwave door.
To Next Page
