Electro-Harmonix 95000 - MIDI Program Change (PC) Messages

37
MIDI Program Change (PC) Messages
The 95000 responds to PC messages to allow the direct selection of loops, initiate button pushes and
mute/unmute all tracks.
PC #
Function
0
Select Loop 00
1
Select Loop 01
…
99
Select Loop 99
100
TRACK FSW Press
101
UNDO FSW Press
102
RECORD FSW Press
103
PLAY/STOP FSW Press
104
LOOP DOWN FSW Press
105
LOOP UP FSW Press
106
NEW LOOP Button Press
107
REVERSE Button Press
108
OCT Button Press
109
TAP Button Press
110
TRACK 1 Button Press
111
TRACK 2 Button Press
112
TRACK 3 Button Press
113
TRACK 4 Button Press
114
TRACK 5 Button Press
115
TRACK 6 Button Press
116
MIXDOWN Button Press
117
PUNCH Button Press
118
QUANTIZE Button Press
119
PAGE Button Press
120
Mute/Unmute Track 1 *
121
Mute/Unmute Track 2 *
122
Mute/Unmute Track 3 *
123
Mute/Unmute Track 4 *
124
Mute/Unmute Track 5 *
125
Mute/Unmute Track 6 *
126
Mute/Unmute MIXDOWN *
127
EXT. CLOCK Button Press
 The single channel mute/unmute action works as follows: if the channel’s level is greater than
zero when the command is received, the channel will be muted. If the channel’s level is zero when
the command is received, the level will be set either to that of 95000’s current track fader
position or to that of the last CC message (20-26), depending on which was the last received.