EasyManuals Logo

Electro-Harmonix BIG MUFF PI User Manual

Electro-Harmonix BIG MUFF PI
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BIG MUFF PI
Congratulations! You have just purchased the finest harmonic distortion-sustain
device developed to date for the electric guitar player. The Big Muff Pi will give
you a sweet violin-like sustaining sound. It's the same legendary sound created
by Jimi Hendrix.
– OPERATING INSTRUCTIONS –
Volume Control — sets the output level.
Sustain Control — adjusts the amount of sustain and distortion.
Tone Control — provides a range of sounds from high treble to deep bass.
Power from the internal 9 volt battery or external battery eliminator is activated
by plugging into the input. The input cable should be removed when the unit is not
in use to avoid running down the battery.
To achieve its long sustain, the Big Muff Pi has very high maximum gain. This
requires that pickups and cables be well shielded and properly grounded to avoid
excessive hum when high sustain control settings are used.
The small jack on the back of the Big Muff Pi is for a 9 volt battery eliminator
capable of delivering 100 mA of current. The unit‚s battery may be left in or taken
out when the eliminator is in use.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electro-Harmonix BIG MUFF PI and is the answer not in the manual?

Electro-Harmonix BIG MUFF PI Specifications

General IconGeneral
ControlsVolume, Tone, Sustain
BypassTrue Bypass
Input Impedance130 kOhms
TypeFuzz
Power Supply9V battery or 9V DC adapter
Input1/4"
Output1/4"
Current Draw3 mA
Output Impedance10k ohm

Related product manuals