Need help?Do you have a question about the Electro-Harmonix Forty-five thousand and is the answer not in the manual?
General| Category | Recording Equipment |
|---|---|
| Current Draw | 200mA |
| Bypass | Buffered |
| Type | Looper |
| Number of Tracks | 4 |
| Sampling Rate | 44.1 kHz |
| Inputs | 1 x 1/4" instrument, 1 x XLR microphone |
| MIDI I/O | In/Out |
| USB | No |
| Power | 9V DC power supply |
| Controls | Footswitches, knobs, buttons |
| Output Impedance | 470 ohms |
| Power Supply | 9.6VDC 200mA power adapter |
| Model | Forty-five thousand |
Step-by-step instructions for recording a basic multi-track loop.
Guidance on layering additional audio onto an existing recorded track.
Details on recording loops with metronome synchronization and beat accuracy.
Steps for transferring audio files from the 45000 to a computer via USB.
Instructions for transferring audio files from a computer back to the 45000.
Manages synchronization with external MIDI clock sources.
Details SDHC card requirements, capacity, and formatting for loop storage.
Enables file transfer between the 45000 and a computer.
Guidance on copying loop folders for backup and restoration.
Steps to prepare the unit for recording a new loop, including input level setup.
Explains the differences between manual and beat-synced loop length determination.
Step-by-step guide to initiating and recording a new loop.
Step-by-step process to begin and perform overdubbing.
Steps to initiate and record a normal mixdown of the 4 tracks.
How the 45000 generates and transmits MIDI sync signals.
How the 45000 synchronizes to external MIDI start, stop, and position commands.
Guidance on using the 45000 for MIDI clock synchronization.
Lists Control Change messages and their corresponding parameters.
Lists Program Change messages for button functions and track control.
To Next Page
