Electro-Voice AC-One - Technical Specifications

Technical Specifications AC
ONE
All level and frequency controls in center position, Lo-EQ and Hi-EQ controls at 0dB,
MID-EQ control at -4dB, unless otherwise specified. Note: 0dBu = 0.775V
Crossover
Mode 2-Way-Stereo + SUB Mono
Frequency, sweepable 45Hz ... 160Hz
Filter Type PowerMax12*
LO-Cut
Filter Type 12dB/octave
Frequency, sweepable 20Hz ... 100Hz
Equalization
LO-EQ 50Hz, Shelving, 0dB ... +12dB
MID-EQ 4kHz, Dip, -8dB ... 0dB
HI-EQ 15kHz, Lift, 0dB ... +8dB
Inputs A, B
Type Active Balanced, XLR-female
Input Impedance 20kohms
Maximum Level +20dBu
Rated Level + 6dBu
Gain Range -∞ ... + 6dB
Parallel Outputs A, B XLR-male
Outputs HI, LO, SUB
Type Active Balanced, XLR-male
Output Impedance 75 ohms
Maximum Level + 20dBu
Rated Level + 6dBu
Gain Range -∞ ... + 6dB
Frequency Response, -3dB @ 1kHz, Lo-Cut 20Hz 16Hz ... 150kHz
Nominal Gain 0dB
Maximum Gain +12dB
Dynamic Range, +20dBu, noise A-weighted 117dB
THD+N, 20Hz ... 20kHz, +6dBu < 0.02%
THD+N, typical, +6dBu 0.003%
Crosstalk Attenuation > 80dB
Mute Switch Rejection > 90dB
Level Control Attenuation > 80dB
Power Requirements, 50Hz....60Hz, voltage selector 100V ... 120V, 220V ... 240V
Power Consumption 17 W
Dimensions, (WxHxD), mm 483 x 43.6 x 226.5
Weight 3.2 kg
Optional, input transformer NRS 90208
*Patents pending
SPECIFICATIONS