Need help?Do you have a question about the Electro-Voice DeltaMax DML-1152 Series and is the answer not in the manual?
General| Nominal Impedance | 8 Ohms |
|---|---|
| Internal Crossover | Yes |
| Type | 2-way full-range loudspeaker system |
| LF Transducer | 15" woofer |
| Input Connectors | Dual NL4 Speakon |
| Enclosure Material | Plywood |
| Coverage Angle | 90° H x 40° V |
Measured in far field at one meter on axis, swept one-third-octave pink noise.
Details the specific drivers and horns used in the system.
Specifies long-term and short-term power handling for LF and HF sections.
Describes beamwidth angles and directivity factors/indices.
Presents second and third harmonic distortion at various frequencies.
Provides physical dimensions and net/shipping weights of the unit.
Introduces the DML-1152 as a two-way biamped system for sound reinforcement.
Highlights the system's design for use with the DMC-1152 electronic controller.
Details the DL15X woofer and its advanced technologies.
Describes the DH1A compression driver and HP64 horn.
Explains the trapezoidal cabinet, materials, and finish.
Specifies recommended power amplifier ratings for LF and HF sections.
Details the flying-option version and its suspension fittings.
Covers procedures for component replacement and available parts.
Outlines the five-year guarantee against defects in workmanship and materials.
Provides the address for service and repair of the product.
To Next Page