Need help?Do you have a question about the Electro-Voice MTL-1 and is the answer not in the manual?
General| Type | Subwoofer |
|---|---|
| Box Material | Plywood |
| Enclosure Material | Plywood |
| Grille | Powder-coated steel |
| Nominal Impedance | 8 Ohms |
| Connectors | Neutrik Speakon NL4MP |
System's power handling capacity per EIA RS-426-A standard.
Guidelines for matching amplifier output to speaker power capacity.
Recommendations for a more conservative amplifier rating.
Suggests using a 32-Hz high-pass filter to protect the subwoofer.
Details the use of Neutrik Speakon connectors for reliable high-current delivery.
Explains wiring for separate amplifier per woofer setup.
System meets EIA RS-426-A 1980 standards for power handling.
Explains peak power capacity based on test voltage.
Details use of HS series hardware for safe suspension in various orientations.
Guidance on using HS7 kits for horizontal/vertical suspension.
Defines the system as horn-loaded with two 18-inch woofers, covering 45-160 Hz.
Specifies a five-year warranty for speakers against defects.
To Next Page