Need help?Do you have a question about the Electro-Voice MTL-4B and is the answer not in the manual?
General| Operating Mode | Passive |
|---|---|
| Sensitivity 1 W/1 m | 103 dB |
| Coverage (Nominal -6 dB) H° | Omnidirectional |
| Coverage (Nominal -6 dB) V° | Omnidirectional |
| Nominal Impedance (Passive) | 4 Ohms |
| System Power Handling (Continuous/Program/Peak) | 800 W / 1600 W / 3200 W |
| LF Transducer | 2 x 18-inch |
| Input Connectors | 2 x NL4 |
| Cabinet Material | Birch plywood |
| Width | 762 mm (30 in) |
| Weight Net | 113 kg |
| Frequency Response (-10 dB) | 35 - 200 Hz |
Details the MTL-4B as a manifolded vented-box low-frequency system utilizing four high-power 18-inch woofers.
Covers frequency response, power handling capacity, sensitivity, beamwidth, directivity, and distortion.
Includes transducer complement, box tuning, impedance, input connections, enclosure materials, finish, dimensions, and weight.
Ideal for concert-sound touring and permanent installations requiring high sound pressure levels at low frequencies.
Details electrical connection via Neutrik Speakon connectors and system wiring for paralleling.
Describes the two-point flying system for flexible array design and quick assembly.
Information on accessing woofers for service and details on included hardware kits.
Formal specifications for system integration into architectural designs.
Details warranty coverage for the loudspeaker system, active electronics, and flying hardware.
To Next Page