Need help?Do you have a question about the Electro-Voice MTH-1 and is the answer not in the manual?
General| Power Handling (RMS/Continuous) | 200 W |
|---|---|
| Power Handling (Program) | 400 W |
| Power Handling (Peak) | 800 W |
| Impedance | 8 Ohms |
| Cabinet Material | Plywood |
| Input Connectors | 2 x Neutrik NL4 |
Introduces the MTH-1 as a 350-watt, two-way, horn-loaded, high-efficiency main loudspeaker system.
Highlights the coaxial mounting of mid/high horns, rotatable patterns, and high 'Q' for intelligibility.
Details the operation of the high-frequency section above 1,600 Hz and mid-frequency section between 160 Hz and 1,600 Hz.
Recommends using an active crossover with specific slopes and frequencies for optimal low-frequency system integration.
Explains the process and usable frequency ranges for biamping the MTH-1 system.
Provides guidelines for selecting appropriate power amplifier output ratings to match system capacity.
Details the Neutrik Speakon NL4MD-V connectors and wiring for full-range and biamp configurations.
Outlines service procedures, including front access for woofer replacement and availability of service data sheets.
Details the use of HSMT-1 hanging hardware for safe suspension of the MTH-1 enclosure.
Provides detailed technical specifications including frequency response, dispersion, dimensions, and weight.
Details the limited warranty period, exclusions, limitations, and how to obtain warranty service.
To Next Page