Need help?Do you have a question about the Electro-Voice Dx38 and is the answer not in the manual?
General| AC voltage | 90-250 V AC (50-60 Hz) |
|---|---|
| Power consumption | 30 W maximum |
| Nominal input voltage | 1.55 V (+6 dBu) |
| Maximum input voltage | 24.5 V (+30 dBu) |
| Input impedance | 20 kΩ |
| Nominal output voltage | 1.55 V (+6 dBu) |
| Maximum output voltage | 8.7 V (+21 dBu) |
| Output impedance | <100 Ω |
| Minimum load impedance | 600 Ω |
| Frequency response | 20 Hz–20 kHz (-0.5 dB) |
| S/N ratio | >115 dB (typical) |
| THD without transformer | <0.01% (1 kHz) |
| THD with transformer | <0.05% (1 kHz) |
| A/D conversion | 24-bit; 128x oversampled; linear phase |
| D/A conversion | 24-bit; 128x oversampled; linear phase |
| Data format | 24-bit linear AD/DA conversion; 48-bit processing |
| Sample rate | 48 kHz |
| Display | 122 x 32 dots, graphic LCD display with LED backlight |
| 3 master delays | 2–900 ms |
| 4 channel delays | 0–900 ms |
| Delay increment | 21 µsec |
Weight and Dimensions| Dimensions | 1.72" (43.6 mm) x 19.0" (483 mm) x 14.8" (375 mm) hwd |
|---|---|
| Weight | 11 lbs (5 kg) |
To Next Page
