Need help?Do you have a question about the Electro-Voice SH-1502ER and is the answer not in the manual?
General| Frequency Response (-3 dB) | 55 Hz - 18 kHz |
|---|---|
| Frequency Response (-10 dB) | 45 Hz - 20 kHz |
| Power Handling (Continuous) | 300 W |
| Power Handling (Program) | 600 W |
| Power Handling (Peak) | 1200 W |
| Sensitivity 1W/1m | 99 dB |
| Maximum SPL | 128 dB |
| Max. SPL/1m (calc) | 128 dB |
| Nominal Impedance | 8 ohms |
| Coverage (Nominal -6 dB) H | 90° |
| Type | Full-range |
| LF Transducer | 15-inch woofer |
| Enclosure Material | Plywood |
| Weight | 70 lbs |
Details the SH-1502ER as a 200-watt, two-way, high-efficiency, constant-directivity stage system.
Explains the use of Road-WoodTM material and durable carpeting for robust enclosure.
Specifies the system's frequency range from 62-20,000 Hz, with a 3-dB-down point at 62 Hz.
Details the EIA Standard RS-426A power test, continuous 200 watts, and 800 watt peak handling.
Presents polar responses, beamwidth vs. frequency, directivity factor (Rg), and index (D₁).
Lists second and third harmonic distortion percentages at various power levels and frequencies.
Describes the matched directional characteristics of woofer and horn for uniform coverage.
Details how to mount the SH-1502ER on speaker stands using the optional SMK-1 kit.
Covers five years for workmanship and materials, excluding abuse and consequential damages.
To Next Page