Need help?Do you have a question about the Electro-Voice SH-1512ER and is the answer not in the manual?
Details the Electro-Voice Model SH-1512ER, including frequency response, power handling, SPL, impedance, and dimensions.
Specifies the correct wire color (red/black, yellow/black) for connecting the crossover to the woofer and driver terminals.
Presents the electrical schematic of the crossover network, detailing inductors, capacitors, and resistors for woofer and tweeter.
Lists all components for one complete unit, including part numbers, quantities, and descriptions for items like panels, drivers, and hardware.
Details the Electro-Voice Model SH-1512ER, including frequency response, power handling, SPL, impedance, and dimensions.
Specifies the correct wire color (red/black, yellow/black) for connecting the crossover to the woofer and driver terminals.
Presents the electrical schematic of the crossover network, detailing inductors, capacitors, and resistors for woofer and tweeter.
Lists all components for one complete unit, including part numbers, quantities, and descriptions for items like panels, drivers, and hardware.
General| Frequency Response (-10 dB) | 50 Hz - 20 kHz |
|---|---|
| Coverage (Nominal -6 dB) H | 90 ° |
| Crossover Frequency | 1.8 kHz |
| LF Transducer | 15 in |
| HF Transducer | 1.5 in |
| Nominal Impedance | 8 ohms |
| Input Connectors | 2 x NL4 |
| Cabinet Material | Plywood |
| Width | 445 mm |
| Tweeter | 1.5" (38 mm) titanium diaphragm compression driver |
| Enclosure Material | 15 mm (0.6 in) plywood |
| Weight | 32 kg (70.5 lb) |
To Next Page