Need help?Do you have a question about the Electro-Voice T22 and is the answer not in the manual?
General| Frequency Response (-3 dB) | 80 Hz - 18 kHz |
|---|---|
| Frequency Response (-10 dB) | 65 Hz - 20 kHz |
| Type | Two-way, full-range |
| LF Transducer | 12-in |
| Input Connections | Neutrik Speakon NL4 |
| Cabinet Material | Plywood |
72-20,000 Hz on axis, swept sine-wave input, half-space anechoic environment.
300 watts EIA RS-426A (long-term average), 1,200 watts peak (short-term).
Horizontal 110° ±60°, Vertical 51° ±7° at specified frequency bands.
1,600 Hz crossover (12 dB/octave); 8 ohm nominal, 7 ohm minimum impedance.
Height 62.0 cm, Width 48.3 cm, Depth 39.6 cm; Net Weight 26.3 kg.
300W, 2-way, high-efficiency, constant-directivity stage system with HF driver protection.
Road-Wood™™™ material, carpet-covered, with metal corners, rubber feet, and handles.
Details frequency response, power handling, sensitivity, coverage angles, and crossover frequency.
Specifies Road-Wood enclosure, carpet finish, input connections, and stand socket.
Details inductor (L1, L2), capacitor (C1, C2), resistor (R1, R2, R3), and PTC components.
Shows connection points for woofer (W+/W-) and tweeter (T+/T-) via jacks J1 and J2.
To Next Page