Need help?Do you have a question about the Electro-Voice X-Array XF and is the answer not in the manual?
General| Coverage (Nominal -6 dB) H | 90° |
|---|---|
| Nominal Impedance (Passive) | 8 Ohms |
| Nominal Impedance | 8 Ω |
| Input Connectors | 2 x Neutrik NL4 |
| Cabinet Material | Plywood |
Details the rear-hinge/front-strap system for array construction and its components.
Explains the proprietary tracks and bracket assemblies on X-Array enclosures for rigging.
Describes Xrhg, Xrhl, and Xrhp rigging hinges and their installation procedures.
Covers Xrss/Xrsl rigging straps and ATM Fly-Ware™ MEGS-4000-T grid compatibility.
Guidance on orienting X-Array enclosures and horns for optimal array performance.
Methods for setting vertical and horizontal angles using rigging straps and grid couplers.
Techniques for distributing load and using pull-up lines for array stability and angling.
Defines working-load limits, safety factors, and user responsibilities for rigging components.
Explains structural ratings, simplified guidelines, and complex analysis for X-Array systems.
Details the process for performing complex structural analyses for X-Array array configurations.
Discusses double-stud fittings, single enclosure flying, and structural analysis procedures.
Describes Electro-Voice's internal procedures for structural testing and computer modeling.
Covers inspection procedures for enclosures, hinges, straps, grids, hoists, and supports.
Provides information on servicing enclosure rigging hardware and hinge assemblies.
Lists available rigging accessories from Electro-Voice and other manufacturers.
To Next Page
