ELECTROCOMPANIET AW 120 User Manual

AW 120
Owner’s Manual
WARNING: To reduce risk of fire or electric shock, do not expose this appliance to
rain or moisture. Verify line voltage before use.
Do not remove cover. No user serviceable parts inside. Refer servicing to qualified
service personnel. The warranty in void if the product is tampered with by non
authorised personnel. Use only authorised Electrocompaniet service station.

ELECTROCOMPANIET AW 120 Specifications

General

Brand	ELECTROCOMPANIET
Model	AW 120
Category	Amplifier
Language	English

Summary

Setup and Initial Use

Unpacking the Amplifier

Instructions for inspecting and unpacking the amplifier unit upon receipt.

Contents of the Carton

Lists all items included in the amplifier's packaging for user verification.

Connecting the Amplifier

Guidelines for connecting the AW 120 DMB to mains and avoiding connection damages.

Rear Panel Overview

Description of the connectors and ports available on the amplifier's rear panel.

Audio Input Configurations

Balanced XLR Operation

Details on using XLR interconnects for balanced audio input to the amplifier.

Single Ended Operation

Instructions for using RCA to XLR adapters for single-ended audio input.

Mono Bridged Mode Operation

Balanced Bridged Mode (Mono) - XLR

How to configure mono bridged operation using XLR interconnects from preamplifiers.

Balanced Bridged Mode (Mono) - EC-K5-SPLITT

How to configure mono bridged operation using the EC-K5-SPLITT interconnect.

Technical Specifications AW120

Amplifier Section Specifications

Detailed technical data for the amplifier's performance characteristics.

Rated Output Power

Specifications for the amplifier's output power at different impedance levels.

Dimensions and Weight

Physical dimensions and weight specifications of the amplifier unit.

Service and Support Policy

When Service Is Needed

Information on how to get the amplifier serviced and expected turnaround times.

Shipping Instructions for Service

Requirements and procedures for shipping the unit to the factory for repair.