Need help?Do you have a question about the ELECTROCOMPANIET ECI 3 and is the answer not in the manual?
General| Signal-to-Noise Ratio | > 100 dB |
|---|---|
| Type | Integrated Amplifier |
| Damping Factor | > 100 |
| Input Impedance | 47 kOhm |
| Channel separation | > 70 dB |
Lists items included with the ECI 3 amplifier, such as the mains cord, fuse, remote control, and batteries.
Describes single-ended operation and balanced input connection using ECP5XLR.
Details REC and PRE OUT outputs, their functions, and potential issues with DC coupling.
Explains the gain switch on the rear panel for adjusting amplifier signal source.
Advises on connecting speakers, warning against shorting the positive output.
Provides the correct procedure for powering down the system, starting with the ECI 3.
Details input impedance, input level, noise, and input sensitivity for the preamplifier.
Lists output impedance, peak current, and THD for the amplifier section.
Specifies output power at different impedances (8, 4, 2 Ohm) and power consumption.
Provides physical dimensions (width, depth, height) and weight of the ECI 3.
To Next Page
